documentation/docs/alpine-server-setup/provisioning.md

149 lines
4.2 KiB
Markdown
Raw Normal View History

2024-08-10 21:54:34 +02:00
# Provisioning
Flash the Alpine Linux extended ISO and make sure the secureboot keys are reset and TPM is enabled in the BIOS of the host.
After booting the Alpine Linux extended ISO, partition the disks. For this action internet is required since `zfs`, `sgdisk` and various other necessary packages are not included on the extended ISO, therefore they need to be obtained from the alpine package repository.
2024-08-10 21:54:34 +02:00
To set it up `setup-interfaces` and `setup-apkrepos` will be used.
```
# setup-interfaces -ar
# setup-apkrepos -c1
```
> To use Wi-Fi simply run `setup-interfaces -r` and select `wlan0` or similar.
A few packages will have to be installed first,
2024-08-10 21:54:34 +02:00
```
# apk add zfs lsblk sgdisk wipefs dosfstools acpid mdadm tpm2-tools zlevis
2024-08-10 21:54:34 +02:00
```
and load the ZFS kernel module
```
# modprobe zfs
```
Define the disks you want to use for this install,
2024-08-10 21:54:34 +02:00
```
# export disks="/dev/disk/by-id/<id-disk-1> ... /dev/disk/by-id/<id-disk-n>"
```
with `<id-disk-n>` for $n \in \mathbb{N}$ the `id` of the disk.
> According to [openzfs-FAQ](https://openzfs.github.io/openzfs-docs/Project%20and%20Community/FAQ.html) using `/dev/disk/by-id/` is the best practice for small pools. For larger pools, using serial Attached SCSI (SAS) and the like, see [vdev_id](https://openzfs.github.io/openzfs-docs/man/master/5/vdev_id.conf.5.html) for proper configuration.
Wipe the existing disk partitions:
2024-08-10 21:54:34 +02:00
```
# for disk in $disks; do
> zpool labelclear -f $disk
> wipefs -a $disk
> sgdisk --zap-all $disk
> done
```
Create on each disk an `EFI system` partition (ESP) and a `Linux filesystem` partition:
2024-08-10 21:54:34 +02:00
```
# for disk in $disks; do
> sgdisk -n 1:1m:+512m -t 1:ef00 $disk
> sgdisk -n 2:0:-10m -t 2:8300 $disk
> done
```
Create device nodes:
2024-08-10 21:54:34 +02:00
```
# mdev -s
```
Define the EFI partitions:
2024-08-10 21:54:34 +02:00
```
# export efiparts=""
# for disk in $disks; do
> efipart=${disk}-part-1
> efiparts="$efiparts $efipart"
> done
```
Create a `mdraid` array on the EFI partitions:
2024-08-10 21:54:34 +02:00
```
# modprobe raid1
# mdadm --create --level 1 --metadata 1.0 --raid-devices <n> /dev/md/esp $efiparts
# mdadm --assemble --scan
```
Format the array with a FAT32 filesystem:
2024-08-10 21:54:34 +02:00
```
# mkfs.fat -F 32 /dev/md/esp
```
## ZFS pool creation
Define the pool partitions
```
# export poolparts=""
# for disk in $disks; do
> poolpart=${disk}-part-2
> poolparts="$poolparts $poolpart"
> done
```
The ZFS system pool is going to be encrypted. First generate an encryption key and save it temporarily to the file `/tmp/tank.key` with:
```
# cat /dev/urandom | tr -dc 'a-zA-Z0-9' | fold -w 20 | head -n 1 > /tmp/tank.key && cat /tmp/tank.key
```
> Later on in the guide `zlevis` will be used for automatic decryption, so this key only has to be entered a few times. However, if any changes are made to the bios or secureboot then this key will be needed again, so make sure to save it.
Create the system pool:
2024-08-10 21:54:34 +02:00
```
# zpool create -f \
-o ashift=12 \
-O compression=lz4 \
-O acltype=posix \
-O xattr=sa \
-O dnodesize=auto \
-O encryption=on \
-O keyformat=passphrase \
-O keylocation=prompt \
2024-08-10 21:54:34 +02:00
-m none \
tank raidz1 $poolparts
```
> Additionally, the `spare` option can be used to indicate spare disks. If more redundancy is preferred than `raidz2` and `raidz3` are possible [alternatives](https://openzfs.github.io/openzfs-docs/man/master/7/zpoolconcepts.7.html) for `raidz1`. If a single disk is used the `raidz` option can be left aside. For further information see [zpool-create](https://openzfs.github.io/openzfs-docs/man/master/8/zpool-create.8.html).
Then create the system datasets:
2024-08-10 21:54:34 +02:00
```
# zfs create -o mountpoint=none tank/root
# zfs create -o mountpoint=legacy -o quota=24g tank/root/alpine
# zfs create -o mountpoint=/home -o atime=off -o setuid=off -o devices=off -o quota=<home-quota> tank/home
# zfs create -o mountpoint=/var -o atime=off -o exec=off -o setuid=off -o devices=off -o quota=16g tank/var
2024-08-10 21:54:34 +02:00
```
> Setting the `<home-quota>` depends on the total size of the pool, generally try to reserve some empty space in the pool.
Write the encryption key to TPM and store the jwe in tpm:jwe:
```
# zfs set tpm:jwe=$(zlevis-encrypt '{}' < /tmp/tank.key) tank
```
> To check if it worked, perform `zfs list -Ho tpm:jwe tank | zlevis-decrypt`.
Finally, export the zpool:
2024-08-10 21:54:34 +02:00
```
# zpool export tank
```